What we do

Every service is designed in-house and issued from one coordinated model.

What we do overview
BIMOne federated model, coordinated every week and handed over as built.

Sectors

Codes, loads and risk differ by building type. Each sector has its own engineers.

Sectors overview
HealthcareHospitals, medical colleges and diagnostics.

About

An MEP design consultancy founded in Indore in 2019, with a branch in Mumbai.

About overview
Careers at OneMEPReal projects from the first month.
OneMEP

Healthcare

MEP engineering for hospitals, medical colleges and diagnostic centres: pressure cascades, medical gases, emergency power and infection control, to NABH, NBC and ASHRAE 170.

Healthcare projects
15
Beds engineered
4,200
Operating theatres
38
Live-hospital expansions
6
Hospital corridor with ceiling services

What a hospital asks of its engineer

A hospital can never be switched off, the air in one room must never reach the next, and the electrical supply has seconds to recover.

Infection control through air

Operating theatres, isolation rooms, ICUs and pharmacies each need a defined pressure relationship with their neighbours. We design the cascade first and the ductwork second, and verify it in commissioning.

Power that recovers in seconds

Life safety, critical and equipment branches run on separate risers. Standby and UPS power are sized for the worst case, and the transfer scheme is tested on paper before it is tested on site.

Building inside a working hospital

Most of our healthcare work is the expansion of a hospital in use. We sequence shutdowns, temporary services and tie-ins so clinical operations continue.

What we deliver

Critical HVAC

Covers

Theatre and ICU air handling, HEPA filtration, pressure cascades, humidity control and energy recovery.

Typical outputs

Room data sheets, pressure plans, commissioning protocols.

Resilient power

Covers

Essential and non-essential distribution, standby and UPS strategy, isolated power for wet locations.

Typical outputs

Single-line diagrams, transfer schemes, discrimination studies.

Medical gases and PHE

Covers

Oxygen, vacuum, medical air and AGSS to HTM 02-01; water quality and hot water safety.

Typical outputs

Pipeline sizing, outlet schedules, water safety plans.

Fire and evacuation

Covers

Horizontal evacuation, compartmentation, smoke control and sprinklers for non-ambulant occupants.

Typical outputs

Fire strategy, cause-and-effect matrices, fire officer liaison.

Codes and standards

  • NABH accreditation requirements for HVAC, electrical and fire safety
  • National Building Code of India 2016, Parts 4 and 8
  • ASHRAE 170, ventilation of healthcare facilities
  • HTM 02-01, medical gas pipeline systems
  • NFPA 99 and NFPA 101, where specified by the client
  • IS 732, IS 3043 and ECBC 2017

Healthcare projects

All healthcare projects

Insights

All insights

Appearance