What we do

Every service is designed in-house and issued from one coordinated model.

What we do overview
BIMOne federated model, coordinated every week and handed over as built.

Sectors

Codes, loads and risk differ by building type. Each sector has its own engineers.

Sectors overview
HealthcareHospitals, medical colleges and diagnostics.

About

An MEP design consultancy founded in Indore in 2019, with a branch in Mumbai.

About overview
Careers at OneMEPReal projects from the first month.
OneMEP

BIM

Coordinated models from LOD 300 to 500, clash detection before every issue, quantities from the model, and an as-built model for the facility team.

Model
LOD 300 to 500
Coordination
Weekly, every discipline
Clash checks
Before every issue
Handover
As-built with asset data
A building under construction

One model, coordinated every week

Every discipline works in one federated model with the architecture and structure. Clashes are found and closed in the model each week, so the drawings that leave the office already fit together.

Quantities, schedules and sections come from the same model, so a change made once shows everywhere. At handover the model becomes the record the facility team runs the building with.

  • A BIM execution plan agreed with the client and design team at the start.
  • Clash detection run and resolved before every drawing issue.
  • Quantities taken from the model for tender and cost checks.
  • As-built models with asset data for operations.

What we model

Modelling

Covers

MEP models linked to the architecture, from LOD 300 for design to LOD 400 for fabrication.

Typical outputs

Discipline models, families with real equipment data, model standards.

Coordination and clash detection

Covers

Federated models with structure and architecture, clash tests and weekly coordination meetings.

Typical outputs

Clash reports, resolution logs, coordinated services drawings.

Quantity take-off

Covers

Measured quantities for ducts, pipes, cables, equipment and fittings from the model.

Typical outputs

BOQ quantities, comparisons between revisions.

Shop drawings and review

Covers

Fabrication drawings, builder's work drawings and review of contractors' shop drawings.

Typical outputs

Shop drawings, sleeve and opening drawings, review comments.

Digital twin handover

Covers

As-built models linked to asset data, O&M information and the BMS points list.

Typical outputs

LOD 500 models, asset registers, structured handover data.

How we deliver

  1. 01

    Plan

    Execution plan

    BIM execution plan, model standards, responsibilities and the coordination schedule.

  2. 02

    Model

    Discipline models

    MEP models built on the architectural and structural models at the agreed level of detail.

  3. 03

    Coordinate

    Clash free

    Weekly federation, clash tests and resolution until no hard clashes remain.

  4. 04

    Document

    Drawings from the model

    Drawings, sections, schedules and quantities generated from the coordinated model.

  5. 05

    Hand over

    As built

    Site changes captured, asset data attached and the model handed to the facility team.

BIM projects

All BIM projects

Insights

All insights

Appearance