Healthcare
MEP engineering for hospitals, medical colleges and diagnostic centres: pressure cascades, medical gases, emergency power and infection control, to NABH, NBC and ASHRAE 170.
- Healthcare projects
- 15
- Beds engineered
- 4,200
- Operating theatres
- 38
- Live-hospital expansions
- 6

What a hospital asks of its engineer
A hospital can never be switched off, the air in one room must never reach the next, and the electrical supply has seconds to recover.
Infection control through air
Operating theatres, isolation rooms, ICUs and pharmacies each need a defined pressure relationship with their neighbours. We design the cascade first and the ductwork second, and verify it in commissioning.
Power that recovers in seconds
Life safety, critical and equipment branches run on separate risers. Standby and UPS power are sized for the worst case, and the transfer scheme is tested on paper before it is tested on site.
Building inside a working hospital
Most of our healthcare work is the expansion of a hospital in use. We sequence shutdowns, temporary services and tie-ins so clinical operations continue.
What we deliver
Critical HVAC
Covers
Theatre and ICU air handling, HEPA filtration, pressure cascades, humidity control and energy recovery.
Typical outputs
Room data sheets, pressure plans, commissioning protocols.
Resilient power
Covers
Essential and non-essential distribution, standby and UPS strategy, isolated power for wet locations.
Typical outputs
Single-line diagrams, transfer schemes, discrimination studies.
Medical gases and PHE
Covers
Oxygen, vacuum, medical air and AGSS to HTM 02-01; water quality and hot water safety.
Typical outputs
Pipeline sizing, outlet schedules, water safety plans.
Fire and evacuation
Covers
Horizontal evacuation, compartmentation, smoke control and sprinklers for non-ambulant occupants.
Typical outputs
Fire strategy, cause-and-effect matrices, fire officer liaison.
Codes and standards
- NABH accreditation requirements for HVAC, electrical and fire safety
- National Building Code of India 2016, Parts 4 and 8
- ASHRAE 170, ventilation of healthcare facilities
- HTM 02-01, medical gas pipeline systems
- NFPA 99 and NFPA 101, where specified by the client
- IS 732, IS 3043 and ECBC 2017




